Mon imprimante me lâche. Une Brother multifonction me tente bien.
Le problème c'est que :
- le driver est en .rpm ou .deb. Idem pour le scanner.
- il y a un script d'install : ne va-t-il pas faire n'importe quoi si il s'attend à être sur une debian ? Va-t-il nécessiter des utilitaires qui ne sont pas sur Slackware ?
Pas de .tgz me stresse. Ca serait balot d'acheter un truc inutilisable...
Pensez-vous que l'install ne va faire que des choses standard et que je n'ai qu'à lancer ?
Elle est donnée compatible linux et le constructeur fournit l'install... mais a-t-il pensé à la Slack ?
Dans ce genre de cas, vous achetez et bidouillez ensuite éventuellement ?
Merci pour vos avis
PS : Ca c'est le contenu du driver. Au pire, je n'aurai qu'à copier là ou il faut ?
Code : Tout sélectionner
$ tar xvf data.tar.gz
./
./usr/
./usr/share/
./usr/share/doc/
./etc/
./etc/opt/
./etc/opt/brother/
./etc/opt/brother/Printers/
./etc/opt/brother/Printers/MFCL2710DW/
./etc/opt/brother/Printers/MFCL2710DW/inf/
./opt/
./opt/brother/
./opt/brother/Printers/
./opt/brother/Printers/MFCL2710DW/
./opt/brother/Printers/MFCL2710DW/LICENSE_ENG.txt
./opt/brother/Printers/MFCL2710DW/LICENSE_JPN.txt
./opt/brother/Printers/MFCL2710DW/cupswrapper/
./opt/brother/Printers/MFCL2710DW/cupswrapper/Copying
./opt/brother/Printers/MFCL2710DW/cupswrapper/brother-MFCL2710DW-cups-en.ppd
./opt/brother/Printers/MFCL2710DW/cupswrapper/lpdwrapper
./opt/brother/Printers/MFCL2710DW/cupswrapper/paperconfigml2
./opt/brother/Printers/MFCL2710DW/inf/
./opt/brother/Printers/MFCL2710DW/inf/brMFCL2710DWfunc
./opt/brother/Printers/MFCL2710DW/inf/brMFCL2710DWrc
./opt/brother/Printers/MFCL2710DW/inf/setupPrintcap
./opt/brother/Printers/MFCL2710DW/lpd/
./opt/brother/Printers/MFCL2710DW/lpd/armv7l/
./opt/brother/Printers/MFCL2710DW/lpd/armv7l/brprintconflsr3
./opt/brother/Printers/MFCL2710DW/lpd/armv7l/rawtobr3
./opt/brother/Printers/MFCL2710DW/lpd/i686/
./opt/brother/Printers/MFCL2710DW/lpd/i686/brprintconflsr3
./opt/brother/Printers/MFCL2710DW/lpd/i686/rawtobr3
./opt/brother/Printers/MFCL2710DW/lpd/lpdfilter
./opt/brother/Printers/MFCL2710DW/lpd/x86_64/
./opt/brother/Printers/MFCL2710DW/lpd/x86_64/brprintconflsr3
./opt/brother/Printers/MFCL2710DW/lpd/x86_64/rawtobr3
./var/
./var/spool/
./var/spool/lpd/
./var/spool/lpd/MFCL2710DW/
$ tar xvf control.tar.gz
./
./postinst
./prerm
./postrm
./md5sums
./control